Tact digital amplifiers and preamplifiers

T-2- New digital Integrated amplifier by Tact

"... Like the M/S 2150 X, which is widely recognized as the best sounding amplifier in the world, T-2 is completely digital amplification without any analog processing..."

General Info
Tact proudly presents the new T-2 digital integrated amplifier, based on the same amplification technology as M/S 2150 X.
Like the M/S 2150 X, which is widely recognized as the best sounding amplifier in the world, T-2 is completely digital amplification without any analog processing. It has ample power for any system configuration and it is 24bit/192kHz compatible. T-2 is extremely flexible with five digital and three analog inputs.
The sound performance of T-2 is supreme and vastly superior to any form of analog amplification.

Main Features
True Digital PCM/PWM power processing
No low-level D/A conversion at all
No analog amplification at all
No negative feedback at all
192kHz/24bit compatible
650VA torodial transformer with dual mono secondary windings
Second order passive low pass filter using custom-made components
90% efficiency - never runs hot - ideal for discrete custom installations
Five digital inputs. Three SPDIF, one AES/EBU and one TOSLINK (optical)
Three analog inputs. Two single-ended and one balanced
Digital Out: 1 RCS S/PDIF signal monitor
RS 232 communication link for PC
IR-system Remote Control

Specifications

Power (RMS)	2 x 150 W/8 Ohms, 2 x 300 W/4 Ohms
Output current	>50 A
SNR (A - waited)	>110 dB
Dynamic range (20 Hz - 20 KHz)	>130 dB
THD+N (all power levels 20 Hz)	< 0.01 %
Digital Resolution	16 - 24 bits
Output Filter	Second order passive low pass filter
Linearity (-120 dB)	> +/- 0.2 dB
Digital inputs	3 x S/PDIF (RCA) 1 AES/EBU (XLR) and 1 Optical (TOSLINC)
Digital pass trough output (used for biamping)	1 S/PDIF (RCS)
Analog Inputs (Analog inputs are optional)	2 x Single ended (RCA), 1 Balanced (XLR)
Weight	18 kg / 37lb
Dimensions	(HxWxD) mm 99,4 x 450 x 448,60

Tact True Digital Amplificiation: The Sound of the Future

Tact True Digital Amplification, the sound of the future. The Tact Millennium is recognized as the first true digital audio amplifier. Other so- called Digital or Class D amplifiers have been various combinations of Analog and Digital technology, in most cases using analog feedback. TacT's True Digital Amplification is conceptually different from any other amplification in almost every area of design. Once you understand the fundamental differences you will realize that Tact's complete line of True Digital Amplifiers offer the potential of much higher fidelity than any other digital or analog design.
Having said all of this it is worth pointing out, that the Tact's True Digital Amplifiers are not amplifiers at all. They are D/A converters that just happen to put out enough current and voltage to drive speakers directly, without the need of any amplification. This way it will perform the functions of: D/A converter, Preamplifier and Power Amplifier, without having any analog circuitry after D/A conversion other than one coil and one capacitor performing a 60 kHz, 2nd order low-pass filter.
Essentially, the hundreds of active and passive components usually required for amplification are gone!